Canon SX20 - Manual (Page 56)

56
SETTING
UP FUNCTIONS USING
MENUS
When images from AV equipment is not
projected correctly (irregular color or no
image), you can select an input signal
type manually.
The input signal is
automatically set.
If images are not projected
correctly in the Auto mode,
select one of input signal
types shown on the left.
Confirm the input signal type
according to the User's Manual that
came with the AV equipment
connected.
Selecting an Input
Signal Type (2)
When two or more types of input signals
are found during execution of the auto PC
adjustment function, select a correct input
signal type.
[1280 x 1024]
[1400 x 1050]
Select an input signal type suitable for the
computer from the displayed signal types.
• Select an input signal type when
the auto PC adjustment function
cannot project images correctly
and two or more signal types are
found.
• For the signal types supported by
this projector, see P84.
••
•
Selecting an Input
Signal Type (1)
Display settings
Input signal select
Display settings
Input signal select
Auto
NTSC
PAL
SECAM
NTSC4.43
PAL-M
PAL-N