Craftsman 316.2926 - Manual (Page 13)

13
TROUBLESHOOTING
NOTE: For repairs beyond the minor adjustments listed above, contact your nearest Sears Parts &
Repair center (1-800-4-MY-HOME®) or other qualified service dealer for an adjustment.
C A U S E A C T I O N
1. Unit is unplugged 1. Make sure that extension cord is securely plugged
into cultivator's cord outlet receptacle on one end
and a 110V outlet on the opposite end.
2. Starter button or bail improperly used 2. Press starter button and hold it in while squeezing
bail against the handle.
3. Overload protection switch has popped out 3. Depress overload protection switch. Follow starting
instructions.
MOTOR WILL NOT START
SPECIFICATIONS
MOTOR
Engine Type .......... AC 120 Volts Electric
Operating RPM ............ up to 8,000 rpm
Ignition Switch . Bail Lock Safety Button
Amperage ............................... 6.5 Amps
Overload Protection ............................................................................................................................ 120 V 5 amp Breaker
CULTIVATOR*
Drive Shaft Tube ................... Steel Tube
Handle .................................. Steel Tube
Cultivating Path Width (Maximum) .........................................................................................................9 inches (22.86 cm)
Cultivating Depth (Maximum) .................................................................................................................6 inches (15.24 cm)
Approximate Weight ....
27 lb. (12.25 kg)
*All specifications are based on the latest product information available at the time of printing. We reserve the right to
make changes at any time without notice.