Cisco OL-5385-01 - Manual (Page 18)

Chapter 4 Working with Users
Updating Users
4-18
Bulk Administration Tool User Guide
OL-5385-01
For example, if you entered “#” in the Value for fields to be ignored, a CSV file
like the following example tells BAT to keep the Manager field the same as the
one that was previously entered in the DC directory but to overwrite User Device
Profile and User Locale for this user in the DC directory and set them to blank.
userid,#,department,,,123456789012,
Updating Users to Cisco CallManager
Use this procedure to bulk-update users to Cisco CallManager.
Before You Begin
You must create a CSV file before you attempt to update users.
Procedure
Step 1 Start BAT. (See Starting BAT, page 1-3 .)
Step 2 Choose Configure > Users.
The Insert Users window displays.
Step 3 In the right corner of the window, click Update Users.
The Update Users window displays.
Step 4 From File Name drop-down list box, choose the CSV file that you created for this
type of bulk transaction.
See “Creating the CSV File for Updating Users” section on page 4-12 for
instructions.
Step 5 In the Value for fields to be ignored box, enter the symbol that you will use to tell
BAT that you want to keep the value that was previously stored in the DC
directory.
If you enter “#” for the value for fields to be ignored, a CSV file like the following
example tells BAT to keep the Manager field the same as the one that was
previously entered in the DC directory but to overwrite User Device Profile and
User Locale for this user in the DC directory and set them to blank:
userid,#,department,,,123456789012,