Baumer G1-G2-GB-GXxxx - Manual (Page 6)

Manual_ProGeber_V1-40_EN.doc 6/40 Baumer IVO GmbH & Co. KG
10.05.11 Villingen-Schwenningen, Germany
2.4 Notes for operation
• Any wiring on encoder plug or control desk is to be effected in powerless state
only. The encoder plug must not be plugged in or out whilst under voltage.
• Please check and plug all plug-in connections before switching on.
• Caution!
Incorrect encoder programmation may lead to breakdown of the system.
Product information
The information in this publication is subject to change without prior notice.
Baumer IVO GmbH & Co. KG does not give any warranty of specified quality or functionality
with respect to the information contained in this publication. Baumer IVO GmbH & Co. KG
assumes no responsibility or liability for any errors or inaccuracies that may appear in this
manual.