CHIEF 129 - Manual (Page 7)

MERCEDES UNIVERSAL ADAPTER
SERIES 124, 129, 140, 170, 202, 208, 210, & 220
1 Bolt, 1/2-13NC x 3, Gr. 8
2 Washer, 1/2
3 Washer, 2 1/2 x 13/16 ID x 1/8
4 Mercedes Uni. Adapter Base
5 Spacer, 1/8
6 Spacer, 1/4
7 Mercedes Pin Plate Adapter Ass’y
8 Outer Support Pin
9 Nut, 1/2-13NC, Gr. 8
(refer to part numbers — page 1)
Mercedes Front 170 SLK Series
4
7
8
1
9
2
Application Instructions:
1. Remove conventional clamp jaws.
2. Install pin plate adapter and universal adapter base on opposite sides of clamp.
IMPORTANT: Rocker panel jack tube hole is 20mm higher in the rear and will require three
1/4 inch spacers between stand and pin plate adapter.
3. Insert outer support pin into pin plate adapter.
4. Lower vehicle onto universal adapter base while guiding pins into jack holes.
(Rev. 6/02)
5
1
8
7
4
9
2
6
Mercedes Rear 170 SLK Series