Cuisinart SC-400 - Manual (Page 5)


4. Place ceramic pot in the base of
the unit.
5. Place the lid on top of the
ceramic pot.
6. Plug in power cord. Your slow
cooker is now ready for use.
OPERATION
Your Cuisinart ® Slow Cooker cooks
food automatically once you set the
time and the desired cooking
mode. When time expires, the unit
automatically switches to the Warm
setting and the Warm indicator light
illuminates. When cooking time and
mode are set, the unit will perform
those functions until the cooking
time expires or the unit is manually
turned off.
Cooking WITH the Timer
1. Place the unit on a clean, dry
counter.
2. Remove glass lid.
3. Fill ceramic pot with ingredients.
4. Replace lid.
5. Plug in unit. There will be no
power to the slow cooker until it
is turned on.
6. To turn unit on, press On/Off
button. The slow cooker will
beep once, and the On/Off red
indicator light and colon (: ) on
the LCD display will flash.
7. Set the desired cooking time by
pushing the + or - button. The
timer ranges from 00:00 to 24:00
hours in 30-minute increments.
NOTE: If there is no timer input,
the On/Off and the colon on the
reading display will continue to
flash.
• Press the + button to increase
time in 30-minute increments or
press the - button to decrease
time in 30-minute increments.
• Press and hold + or - to scroll
automatically in 30-minute steps.
• Press + and - simultaneously to
reset to 00:00. Repeat the above
two steps to reset time.
• After setting time, timer display
and On/Off indicator will still
flash. Please proceed to setting
the cooking mode
8. Setting Cooking Modes
Three cooking modes, Simmer,
Low and High, give you the
opportunity to prepare a wider
variety of dishes. You can adapt
many recipes to slow down the
cooking time, or speed it up, to
coordinate meals to your
schedule.
You will usually want to use the
Simmer or Low setting for
recipes that cook longer. If you’re
starting a dish later in the day,
select the High setting to ensure
that your food is cooked, warm,
and ready when you’d like to eat.