Baumer BA IRxx.DxxL - Manual (Page 12)

en_BA_IRxx .DxxL.docx 12/12 Baumer Electric AG
10.11.2014 14:03/simg V1.0 ANW_81146130 Frauenfeld, Switzerland
6 Error correction and tips
6.1 Error correction
Error Error correction
Linearity of the output does not
meet the expectations Change the geometry and material of the target to match as closely as
possible to the standard target. If this is not possible, ask Baumer for a
customized version.
Slope is not steep enough Use larger target or ask Baumer for a customized version.
The digital output is switching
differently if an object is
approaching or leaving. This is due to the hysteresis of the sensor in order to guarantee stable
behavior.
7 Change History
2014-11-10 simg Manual released in version 1.0