Baumer G1-G2-G0-GE-GB-GXxxx User Manual
Page 24
Advertising
Manual_ProfibusDPV0_BIDE_EN.docx
24/26
Baumer IVO GmbH & Co. KG
22.11.12
Villingen-Schwenningen, Germany
Bus cover
– hollow shaft G0 and GB
Interface converter - GK410
The connection cable is wired to the 8-pin terminal block inside the interface converter.
The additional functions Zero and UP/DOWN provided by the encoder are to be assigned as follows for
optimum interference immunity:
- Zero additionally assigned to GND
- UP/DOWN additionally assigned to UB
The encoder outputs DV, DV-MT may either be cut off and isolated or assigned to the available terminals
NC1(DV) respectively NC2 (DV-MT).
Advertising