Clarion DXZ615 - Manual (Page 24)

28
DXZ615
English
Digital Radio / DAB Operations
4. Perform the following operation depending on
the connected model.
Turn the Rotar y knob $ clockwise or
counterclock wise to set the information item
for ON or OFF.
5. Press ADJ button 2 to return to the previous
display.
Switching the PTY and INFO display
language
You can select one of 2 languages (English or
French) for the PTY and INFO shown in the dis-
play.
∗
The factory default setting is “English”.
TA (Traffic Announcement)
In TA standby mode, when a traffic announcement
broadcast starts, the traffic announcement broad-
cast is received as top priority regardless of the
function mode so you can listen to it. Traffic
programme (TP) automatic tuning is also possible.
∗
This function can only be used when “TP” is lit in
the display. When “TP” is lit, this means that the
RDS broadcast station being received has traffic
announcement programmes.
● Setting TA standby mode
If you press ISR button 9 when only “TP” is lit in the
display, “TP” and “TA” light in the display and the unit
is set into TA standby mode until a traffic announce-
ment is broadcast. When a traffic announcement
broadcast starts, “TRA INFO” appears in the display.
If you press ISR button
9 while a traffic announce-
ment broadcast is being received, the traffic announce-
ment broadcast reception is cancelled and the unit
goes into TA standby mode.
● Cancelling TA standby mode
With “TP” and “TA” lit in the display, press ISR
button
9 . The “TA” in the display goes off and
TA standby mode is cancelled.
∗
If “TP” is not lit, pressing ISR button 9 searches
for a TP station.
● Searching for a TP station
When “TP” is not lit, if you press ISR button 9 ,
“TA” in the display lights and the unit automati-
cally receives a TP station.
Note:
• If a TP station is not received, the unit continues the
search operation. Pressing ISR button 9 again goes
off “TA” in the display and stops TP station searching.
Auto store function for TP stations
You can automatically store up to 6 TP stations into
preset memory. If the number of TP that can be re-
ceived is less than 6, broadcast stations already
stored in memory are left without being overwritten.
With “TA” lit in the display, press and hold AS button 4
for 2 seconds or longer. The TP stations with the good
reception sensitivity are stored into preset memory.
∗
Even if you select FM1 or FM2, a TP station is
stored into memory for FM3.
PTY
This function enables you to listen to a broadcast
of the selected programme type when it starts even
if the unit is on a function mode other than radio.
∗
Some countries do not yet have PTY broadcast.
∗
In TA standby mode, a TP station has priority over
a PTY broadcast station.
● Setting PTY standby mode
When you press RDM button 6 , “PTY” lights in
the display and the PTY standby mode is turned
on. When the selected PTY broadcast starts, the
PTY item name appears in the display.
● Cancelling PTY standby mode
When you press and hold RDM button 6 for 1
second or longer, “PTY” goes off in the display
and PTY standby mode is cancelled.
● Cancelling a PTY interrupt broadcast
Press RDM button 6 during the PTY interrupt
broadcast, the PTY interrupt is cancelled and the
unit returns to PTY standby mode.
Selecting PTY
1. When you press RDM button 6 , the unit goes
into PTY select mode.
2. Press any one of Preset buttons 8 . Alterna-
tively, turn the Rotary knob $ clockwise or
counterclockwise to select the desired PTY.
∗
Below are the factory default settings stored
for Preset buttons
8 .
PTY item
ENGLISH Contents
1 NEWS News
2 TOP 40 Top 40
3 COUNTRY Country music
4 SOFT Soft music
5 CLASSICL Classical
6 R & B Rhythm and Blues
Preset
number