Microwave – FRIGIDAIRE FPMO209KF User Manual

Page 3

Advertising
background image

Specifications

subject to change.

Accessories information available

on the web at

frigidaire.com

Microwave

FPMO209K F 

24" Built-In

Built-In Microwave with 27"or 30" Trim Kit

(Side Controls - 2.0 cu.ft.)

Professional and Gallery

Microwave Specifications

•

Product Shipping Weight (Approx.) – 46 Lbs. (not incl. Trim Kit)

•

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

•

Connected Load (kW Rating) @ 120 Volts = 1.7 kW

(For use on adequately wired 120V, dedicated circuit having

2-wire service with a separate ground wire. Appliance must

be grounded for safe operation.)

•

Amps @ 120 Volts = 14.3 Amps

•

Always consult local and national electric codes.

•

Microwave can stand alone on countertop or be built in with optional

30" or 27" Trim Kit (ordered by individual part number) which

includes Bottom Duct Assembly – shipped in separate box.

•

Allow 21" minimum clearance for 90° door swing.

•

Minimum 20" deep oven cutout dimension is critical for proper

installation for oven and faceplate to fit flush against cabinet front.

•

Consult local building code, in the event that cutout opening may be

required to be enclosed with sides, ceiling and rear partition.

•

Full oven base of solid plywood or similar material required, capable

of supporting 100 Lbs.

•

Base must be level and front of cabinet square for proper operation.

•

Grounded outlet should NOT be located in shaded area, as indicated,

UNLESS cabinet depth is greater than 21".

•

Can NOT be installed above any gas wall oven.

•

Built-In Microwave is approved to be used in combination with any

Frigidaire® Electric Single Wall Oven and /or Warmer Drawer. (Refer to

model-specific Combination Installation Specification pages on web.)

•

When used in combination with another Frigidaire® built-in product,

a minimum clearance of 2-7/8" required from bottom of Built-In

Microwave cutout to top edge of companion product’s faceplate,

leaving a 2" visible gap between both product faceplates.

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions

Optional Accessories

•

30" Stainless Steel Trim Kit – (PN # MWTKP30KF).

•

27" Stainless Steel Trim Kit – (PN # MWTKP27KF).

USA

•

10200 David Taylor Drive

•

Charlotte, NC 28262

•

1-800-FRIGIDAIRE

•

frigidaire.com

CANADA

•

5855 Terry Fox Way

•

Mississauga, ON L5V 3E4

•

1-800-265-8352

•

frigidaire.ca

FPMO209K 11/12

© 2012 Electrolux Home Products, Inc.

Advertising