Care & cleaning, Care & cleaning tips – FRIGIDAIRE FGUS2647LF User Manual
Page 24
24
CARE & CLEANING
Care & Cleaning Tips
Part
What To Use
Tips and Precautions
Interior & Door
Liners
•
Soap and water
•
Baking soda and
water
Use 2 tablespoons of baking soda in 1 quart
of warm water. Be sure to wring excess
water out of sponge or cloth before
cleaning around controls, light bulb or
any electrical part.
Door Gaskets
•
Soap and water
Wipe gaskets with a clean soft cloth.
Drawers & Bins •
Soap and water
Use a soft cloth to clean drawer runners and
tracks.
Glass Shelves
•
Soap and water
•
Glass cleaner
•
Mild liquid sprays
Allow glass to warm to room temperature
before immersing in warm water.
Toe Grille
•
Soap and water
•
Mild liquid sprays
•
Vacuum attachment
Vacuum dust from front of toe grille.
Remove toe grille (see Installation Instruc-
tions). Vacuum backside, wipe with sudsy
cloth or sponge. Rinse and dry.
Exterior &
Handles
•
Soap and water
•
Non Abrasive Glass
Cleaner
Do not use commercial household clean-
ers containing ammonia, bleach or alcohol
to clean handles. Use a soft cloth to clean
smooth handles. DO NOT use a dry cloth
to clean smooth doors.
Exterior &
Handles
(Stainless Steel
Models Only)
•
Soap and water
•
Stainless Steel Clean-
ers
Never use CHLORIDE or cleaners with
bleach to clean stainless steel.
Clean stainless steel front and handles with
non-abrasive soapy water and a dishcloth.
Rinse with clean water and a soft cloth. Use
a non-abrasive stainless steel cleaner. These
cleaners can be purchased at most home
improvement or major department stores.
Always follow manufacturer’s instructions.
Do not use household cleaners containing
ammonia or bleach.
NOTE: Always clean, wipe and dry with
the grain to prevent scratching. Wash
the rest of the cabinet with warm water and
mild liquid detergent. Rinse well, and wipe
dry with a clean soft cloth.
Replacing Light
Bulbs
•
Unplug refrigerator
•
Wear gloves
•
Remove light cover
•
Replace old bulb
•
Replace light cover
•
Plug in the refrigera-
tor
CAUTION: Wear gloves when replacing
light bulbs to avoid getting cut.
Use same wattage when replacing bulb