27" combination installation – FRIGIDAIRE FPEW2785KF User Manual

Page 4

Advertising
background image

Specifications

subject to change.

USA

•

10200 David Taylor Drive

•

Charlotte, NC 28262

•

1-800-FRIGIDAIRE

•

frigidaire.com

CANADA

•

5855 Terry Fox Way

•

Mississauga, ON L5V 3E4

•

1-800-265-8352

•

frigidaire.ca

MOSS24_EW 27INST FR 02/12

© 2012 Electrolux Home Products, Inc.

27" Combination Installation Specifications

•

Always consult local and national electric codes.

(Refer to product-specific electrical specifications on this page.)

•

Minimum 23-1/2" deep cutout dimension is critical for proper

combination installation, to ensure that each built-in product’s

faceplate will fit flush against cabinet front.

•

Bases must be level and cabinet front must be square.

•

Minimum 4-1/2" required distance from bottom of Wall Oven cutout

to floor, 31" suggested.

•

Respect critical dimensions as noted for proper installation of

built-In products.

•

Minimum 21" clearance needed for Wall Oven door depth when open.

27" Built-In Microwave Specifications

•

For built-in installation, microwave MUST be installed with optional

27" Trim Kit which includes Bottom Duct Assembly – shipped in

separate box, ordered by individual part number.

•

Voltage Rating – 120V / 60 Hz / 15 or 20 Amps

•

Connected Load (kW Rating) @ 120 Volts = 1.7 kW

(For use on adequately wired 120V, dedicated circuit having 2-wire

service with a separate ground wire. Appliance must be grounded

for safe operation.)

•

Amps @ 120 Volts = 14.3 Amps

•

Full oven base of solid plywood or similar material required, capable

of supporting 100 Lbs.

•

Minimum 2-7/8" clearance required from bottom of Built-In Microwave

cutout to top edge of Wall Oven’s faceplate, leaving a 2" visible gap

between both product faceplates.

27" Electric Single Wall Oven Specifications

•

Single phase 3- or 4-wire cable, 120 / 240 or 120 / 208 Volt, 60 Hertz

AC only electrical supply with ground required on separate circuit

fused on both sides of line.

•

For detailed electrical requirements, refer to model-specific product

page and installation guide on web.

•

Full oven base of solid plywood or similar material required, capable

of supporting 150 Lbs.

•

To adapt oven to fit cutout height greater than 28-1/8", add one

2"-wide wood shim of appropriate height to each side of opening

under oven side rails. Lifting oven will hide larger cutout opening

at top and oven’s 1"-high bottom trim will hide shims at bottom.

(Standard 1"- High Bottom Trim included.)

•

To adapt oven to fit cutout height greater than 28-5/8", optional

3"- High Bottom Trim available.

Note: For planning purposes only. Refer to Product Installation Guide

on the web at frigidaire.com for detailed instructions.

Frigidaire 27" Combination Installation –

24" Built-In Microwave (with 27" Trim Kit)

Electric Single Wall Oven (excluding model GLEB27Z7H)

27" Combination Installation

Built-In Microwave / Single Wall Oven 

Advertising