Chamberlain RESIDENTIAL GATE OPERATOR GA420D - Manual (Page 12)

Typical Tubular Metal Gate
Typical Tubular Metal Gate
Typical Wood Gate Typical Wood Gate
Typical Farm/Ranch Gate Typical Farm/Ranch Gate
Typical Chain Link Gate
Typical Chain Link Gate
Preparation and Overview 12
Recommended:
Mounting Options
Mounting locations vary depending on type and style of your gate.
NOTES:
• The top of operator must be mounted at least 10" up from ground. Environmental conditions should be considered at
this time. In windy areas to ensure the gate stops at the same place each time we recommended the purchase of an
automatic gate lock for the closed position and hard stop(s) for the open position.
• Not recommended for plastic or vinyl gates. Refer to gate manufacturer for recommendation and options.
= Gate post bracket mounting locations
= Gate bracket mount locations
Left-Hand Hinge Mounted Right-Hand Hinge Mounted