Chamberlain RESIDENTIAL GATE OPERATOR GA420D - Manual (Page 45)

OPEN
OPEN
CLOSE
OPEN
OPEN
CLOSE
OPEN
OPEN
CLOSE
45 Operation and Maintenance
OPEN
OPEN
CLOSE
940D
956D
953D
Automatic Gate Lock:
Solenoid-driven lock that automatically
unlocks when gate is open and locks
when gate is closed. Can be mounted
onto gate or post. Can be released in
case of emergency.
915GA
921GA Vehicle Exit Sensor:
One piece outdoor buried vehicle
motion detector with sensing probe is
housed in a small relay type housing
so it is easy to integrate with gate,
providing for free exit only.
3-Button SECURITY✚ ® Remote
Control:
Includes visor clip.
SECURITY✚ ® Keyless Entry:
Enables homeowner to operate gate
operator from outside by entering a
four digit code on a specially designed
keyboard.
3-Button Mini-Remote Control with
SECURITY✚
® :
With key ring and fastening strip.
Accessories
OPEN
OPEN
CLOSE
Push-To-Open Bracket:
Used to allow the gate operator to
push the gate open.
919GA
Protector System ® Safety Sensors:
The Safety Sensors are intended
for installation with the operators
covered in this manual. To order call:
1-866-826-4943 or visit our website
www.chamberlain-diy.com.
916GA
Gate Arm Pin Lock:
The pin lock kit is designed to prevent
disconnection of the gate operator and
the gate while providing a means to
open the gate in case of power failure.
914GA
OPEN
OPEN
CLOSE
Low Voltage Wire (100')
Low voltage wire is required to connect
the transformer to the control box. Also
can be used to connect optional safety
sensors to the control box. UL
approved for burial.
OPEN
OPEN
CLOSE
Low Voltage Wire (250')
Low voltage wire is required to connect
the transformer to the control box. Also
can be used to connect optional safety
sensors to the control box. UL
approved for burial.
917GA
OPEN
OPEN
CLOSE
918GA
OPEN
7
OPEN
CLOSE
Wireless Gate Doorbell 920GA Gate Access System Battery
The Gate Access System Battery is
designed to add a battery for solar
applications or as a replacement
battery (includes cable harness).
922GA
OPEN
OPEN
CLOSE
OPEN
TO
PRESS
R ING
OPEN
CLOSE
OPEN
OPEN
CLOSE
Allows guests to ring a doorbell
in the house from the keypad.
Homeowner can open gate
from inside the home using the
included remote control button.
No wiring required. Keypad can
be programmed to allow access to
selected guests using a 4 digit code.