Cannon LICHFIELD 10500G - Manual (Page 16)

16
CARE AND CLEANING
COOKER FINISH CLEANING METHOD
Vitreous Enamel
Hotplate, burner caps,
fascia, roasting dish, grill
pan, oven base and rear,
inside of grill compartment,
inside of doors.
Cloth wrung out in warm soapy water. Stubborn
stains can be removed with a cream paste,
liquid cleaner or by rubbing with fine steel wool
soap pads.
Check that the cleaning agent is approved by the
Vitreous Enamel Association.
Paint
Side trims, plinth, fascia
bottom trim, side panels,
door handles
Wash with a cloth wrung out in warm
soapy water only. DO NOT USE ABRASIVES.
Aluminium
Hotplate burner bodies
Similar to paint cleaning above. Use a nylon brush to
remove any cleaning materials, water or dirt from the
hotplate burner rings.
Glass
Oven/grill door fronts
As for enamel cleaning. Polish with a clean dry
cloth or kitchen roll.
Chromium Plating
Oven shelves, grill pan grid,
grill pan handle support
Wipe with a cloth wrung out in warm soapy water.
A fine steel wool soap pad e.g. Brillo, Ajax, or a
chrome or stainless steel cleaner may be used.
Plastic
Grill pan handle,
control knobs
Wipe with a cloth wrung out in warm soapy water.
Stubborn stains can be removed with a cream
cleaner.
Note: To ensure rapid lighting of the hotplate burners every time they are used, the
ignitors must be kept clean and dry. Remove any food spillage or cleaning materials
from the electrode using a small nylon brush such as a toothbrush.