Clean, Important – FRIGIDAIRE FFEF3019MS User Manual

Page 22

Advertising
background image

22

CLEAN

2. Press the start time keypad. The ":" in the time of day

display will flash.

3. Press and hold the

keypad to scroll to the time to

start a delayed self-clean cycle. Release the keypad
when the desired start time is displayed.

4. Press the clean keypad. "---" appears in the display.

5. To start press the

or

keypad once. "3:00" will

appear in the display indicating that a 3 hour self-clean

time is set. To change to a shorter 2 hour self-clean

time press the

keypad once ("2:00" will appear in

the display indicating a 2 hour clean time is desired).

Once the oven control is set for clean, the motor

driven lock will begin to automatically lock the oven
door. The "door locked" indicator light will flash while
the oven door is locking. DO NOT open the oven door

while this indicator light is flashing (allow about 15

seconds for the oven door to completely lock).

Stopping or interrupting a self-clean cycle

If it becomes necessary to stop or interrupt a self-

cleaning cycle once it has been activated:
1. Press the clear off keypad.
2. Once the oven has cooled down (about 1 hour) and the

"door locked" indicator light has turned off, the oven

door may be opened.

3. If needed, the self-clean may be restarted.

To start a self-clean cycle immediately without delay,

skip steps 2 & 3 in the instructions provided below.

Setting a self-clean cycle or a delayed

start self-clean cycle

IMPORTANT

When the self-clean cycle has completed:
1. The time of day will appear in the oven display and the

"clean" and "door locked" indicator lights will continue

to glow.

2. Once the oven has cooled down for about 1 hour and

the "door locked" light has turned off, the oven door

may be opened.

6. "CLn" will appear in the oven display during the self-

clean cycle and the "door locked" indicator light will

remain ON until the self-cleaning cycle is complete or

cancelled and the oven temperature has cooled.

NOTES

CAUTION

Setting a self-clean cycle

To avoid possible burns use care when opening the

oven door after the self-cleaning cycle is finished.

Stand to the side of the oven when opening the

oven door to allow any hot air or steam to escape.

• DO NOT force the oven door open. This can damage

the automatic door locking system. Use caution and

avoid possible burns when opening the oven door after

the self-cleaning cycle has completed. The oven may

still be VERY HOT.

Whenever the clean feature is active you may check

the amount of time remaining in the self-clean cycle by

pressing the clean keypad once. Remember the oven

door will not unlock until the range has cooled

sufficiently. You will need to add about 1 hour to the

time displayed before you can use the oven for cooking

again.

After the oven has completely cooled and the oven

door has unlocked, wipe away any residue or powdered

ash from the oven interior using a damp cloth or paper

towel.

1. Remove all items from the oven, cooktop, and all oven

racks from the oven and be sure the oven door is

completely closed. Be sure the oven control displays

the correct time of day and adjust if needed.

NOTE

Advertising