Acronis Backup Advanced (Cloud) - User Guide - Manual (Page 29)

29 Copyright © Acronis International GmbH, 2002-2014
5. Click Schedule, and then specify the schedule according to which the incremental backups will
run, for example on the last Saturday of each month, as follows:
a. In Run the task:, click Monthly.
b. Under Schedule, click On:, and then leave only the Last and the Sat check boxes selected in
the respective lists.
c. Under During the day execute the task…, specify the time of day when you want the
backups to run.
6. Click OK to close the Schedule window.
7. In Retention rules, select Delete backups older than..., and then specify the value of six months.
8. Click Save to update the backup plan.
9. If prompted, specify the credentials which the plan's scheduled tasks will use to run.
10 Accessing backups stored in the cloud vault
To access the backups stored in the cloud vault
1. Connect the console to the management server or a managed machine.
2. In the Navigation tree, expand Vaults, then expand Centralized, and then click the vault name.
11 Operations with backups stored in the cloud
storage
When the console is connected to a machine, you can perform the following operations with backups
stored in the cloud storage:

View the content of any backup of any machine

Recover (p. 29) data from any backup of any machine

Delete any backup of the machine to which the console is connected
You cannot delete backups when the console is connected to the management server.
For detailed information about these operations, please refer to the "Operations with backups"
section of the Acronis Backup Advanced built-in help.
12 Recovery from the cloud storage
This section provides step-by-step instructions for recovering data from the cloud storage.
12.1 Recovering files
These steps show how to recover files from a backup stored in the cloud storage to a folder you
specify.
To recover files from the cloud storage
1. Connect the console to the management server.
2. Click Recover.
3. Click Select data, click Data path, and then click Browse.