Acronis Disk Director 11 Advanced Server - User Guide - Manual (Page 81)

81 Copyright © Acronis, Inc., 2000-2010
initialize
Initializes not initialized disks.
Options
[/os:<id>]
Specifies the ID of the operating system layout under which the operation will be executed.
If not specified, the operation is executed under the currently running operating system.
/disks:<id_list>
Specifies the hard disk IDs, on which the operation will be executed (separated by commas).
[/ps:"<MBR|GPT>"]
Specifies the disk partitioning scheme — MBR or GPT.
If not specified, the MBR partitioning scheme is used.
[/type:"<Dynamic|Basic>"]
Specifies the disk type — Dynamic or Basic.
If not specified, the Basic disk type is used.
list
Lists IDs of all the operating systems, disks, disk groups and volumes on the machine.
9.2 Usage examples
Create a volume
\ADDCommandLine.exe create /os:1 /disks:2 /type:Logical /start:1024 /size:61440
/fs:NTFS /clustersize:4096 /label:MyData /letter:S /reboot
This will create the 60-GB logical NTFS volume MyData (S:) on the second hard drive with 1-GB
offset. The volume will have a 4-KB cluster size. The operation will be performed under the
current operating system with reboot.
\ADDCommandLine.exe create /os:1 /disks:3,4 /type:Spanned /size:1536000 /fs:NTFS
/clustersize:4096 /label:Media /letter:Y /reboot
This will create the 1.5-TB spanned NTFS volume Media (Y:) on the third and fourth hard drives.
The volume will have a 4-KB cluster size. The operation will be performed under the current
operating system with reboot.
Resize a volume
\ADDCommandLine.exe resize /os:1 /volume:7 /start:2048 /size:10240 /reboot
This will resize the seventh volume to 10 GB under the current operating system after reboot.
The volume will be resized with 2-GB offset.
Initialize a disk
\ADDCommandLine.exe initialize /os:1 /disks:5 /ps:MBR /type: Basic
This will initialize the fifth disk as a basic disk with MBR partitioning scheme.