Acronis Drive Monitor - User Guide - Manual (Page 21)

<!-- value for type = {NONE = 0, ERROR = 1, WARNING = 2, INFORMATION
= 3,
SECURITY_AUDIT_SUCCESS = 4, SECURITY_AUDIT_FAILURE = 5} --
>
<include_filter risk="High">
<!-- Conditions in tag 'parameter' are logical AND-->
<parameter argument="source_name" operation="contain" />
<parameter argument="message" operation="equal" value="Achtung" />
</include_filter>
<!-- Conditions in individual tag 'include_filter' are logical OR-->
<include_filter risk="Low">
<parameter argument="event_code" operation="equal" value="6011" />
</include_filter>
<exclude_filter>
<!-- Conditions in individual tag 'parameter' are logical OR-->
<parameter source_name="W32Time" event_code="35" />
</exclude_filter>
</filter_root>
3.5 Options
The Options page allows you to adjust the desired settings for the following actions (click the Down
arrow icon on the right to open the respective menu):
 Alerts (p. 21) - configure receiving e-mail notifications and regular reports;
 Temperature monitoring (p. 23) - specify a critical or warning temperature;
 Critical events monitoring - enable/disable monitoring of critical events;
 Disks monitoring (p. 24) - configure disks monitoring settings;
 Backup monitoring (p. 24) - configure backups monitoring.
3.5.1 Alerts
When configured, Acronis Drive Monitor will notify you when problems are detected. Alerts may be
delivered via e-mail. To provide an e-mail addresses or change details, click Change settings... link
(see E-mail parameters (p. 22) section for details).
Acronis Drive Monitor allows you to select when and how often to receive reports: