FRIGIDAIRE FPDF4085KF - Manual (Page 22)

22
setting main oven controls
 note
The oven temperature adjustments made with this feature
will not change the Self-Clean cycle temperature or the Broil
temperature.
TO SET THE OVEN CONTROL BACK TO THE
FactorY deFault settings
This function allows you to reset the user defined settings
back to the original settings. These include 12 or 24 Hour
Time of Day Display, Continuous Control Operation or
12 Hour Energy Saving Mode, Silent Control Operation
or Normal Sounds, Fahrenheit or Celsius Temperature
Display, Oven Temperature Adjustment (set back to 0).
1. Press and hold 7 until the first single beep sounds
(about 6 seconds).
2. After the first beep, press START once. All the setting
are now set to the original factory default.
oven ligHt
The oven is equipped with 2 oven lights. The oven
lights will turn ON automatically, when the oven door is
opened.
The oven light may be turned ON when the door is closed
by using the oven light pad located on the control panel.
The oven light key will toggle the lights at full intensity.
To toggle the Oven Lights ON and OFF:
1. Press .
The interior oven lights are covered with a glass shield
held by a wire holder. The glass shield must be in place
whenever the oven is in use.
To change the interior oven lights, see “Changing the
oven light” in the care & cleaning section.
To adjust the oven temperature higher
1. Press BAKE for 6 seconds. “0°” will appear in the
display.
2. To increase the temperature use the number pads to
enter the desired change (Example 30°F) 3 0. The
temperature may be increased as much as 35°F.
3. Press start to accept the temperature change
and the display will return to the time of day. Press
cancel to reject the change if necessary.
To adjust the oven temperature lower
1. Press BAKE for 6 seconds. “0°” will appear in the
display.
2. To decrease the temperature use the number pads to
enter the desired change (Example -30°F) 3 0 and
then press selF clean. The temperature may be
decreased as much as 35°F.
3. Press start to accept the temperature change
and the display will return to the time of day. Press
cancel to reject the change if necessary.
adjusting oven temPerature
The temperature in the oven has been pre-set at the
factory. When first using the oven, be sure to follow
recipe times and temperatures. If you think the oven
is cooking too hot or too cool for the temperature you
select, you can adjust the actual oven temperature to be
more or less than what is displayed. Before adjusting,
test a recipe by using a temperature setting that is
higher or lower than the recommended temperature. The
baking results should help you to decide how much of an
adjustment is needed.