FRIGIDAIRE FDB2410HIB - Manual (Page 7)

7
Status Indicator Lights
The WASHING light (some models) comes on at
the beginning of cycle and remains on until the end
of the main wash.
The DRYING light (some models) indicates the
drying portion of the cycle. The light will come on
when either drying option is selected.
The LOW RINSE light (some models) comes on
at the end of a cleaning cycle when the rinse agent
reservoir is low. The light will remain on through 5
successive cycles or until the reservoir is filled.
The CLEAN light (some models) will come on at
end of cycle and remain on until door is opened.
Child Lock Controls
To prevent children from accidently changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing and releasing
the or the NO HEAT DRY pad for 3 seconds while
the door is latched. An indicator light on the lock
graphic pad will illuminate when the controls
are locked and no new selections can be made
until the lock is released. To unlock the controls,
press the NO HEAT DRY pad until the indicator
light goes out.
Status Window
The STATUS window, indicates the following
activity:
1H-24H……….. Number of delay start hours.
The last hour will count down in
minutes.
CL……………… Close dishwasher door. The
status indicator lights will also
flash to indicate current cycle
status.
Hd ...........…..… Indicates a water heat delay.
MINUTES…...… Number of minutes left in cycle
(1-99). If cycle is longer than 99
minutes, a small light will appear
in the lower right corner and
remain on until time counts
below 99.
PF……………… Appears in window when
dishwasher is first installed, or
when power has been
interrupted. HI-TEMP WASH
and NO HEAT DRY indicator
lights will also flash. To clear,
touch START/CANCEL pad.
LO.........................Appears in window when the
rinse aid dispenser is low and
needs to be refilled.
Operating Instructions
(continued)