AAXA Technologies OEM-25 - Manual (Page 9)

External Inputs
The OEM-250 micro projector can be toggled to accept different types of
inputs. This includes VGA (Mini VGA), HDMI and Composite Video (3.5mm
jack). To toggle through the sources, press the far right button on touch-
pad or the input button on the remote control to select the appropriate
source.
To Connect to a VGA Source
The projector can accept a VGA input signal.
Connect the VGA cable to your source and
the other end should be inserted in the slot
on the side of the projector that reads ‘VGA’.
Toggle through the input sources and once
you select VGA input, your display should
appear.
Important: Be sure to setup the computer to enable a video signal output.
On some laptops this is done by pressing and holding Function F5 Key. If
using the OEM-250 as an external monitor on Windows based systems, this
can be done by selecting “extend my desktop to this monitor”. The native
resolution of the OEM-250 projector is SVGA (800x600) and it accepts up to
a 1280x800 signal. Depending on the video driver different resolutions many
need to be selected for proper output.
Note: Each computer system is different - please check with your owner’s
manual for how to properly output video signals. Some Apple computers may
requre a DVI to VGA adapter.
8