Ames Fire & Waterworks 920GS-01-15 Stainless Steel Pressure Sustaining Control Valve with Solenoid (On-Off) and Hydraulic Check Feature - Manual (Page 2)

01/06
920 Series Model
8550 Hansen Road • Houston, Texas 77075 • (Ph) 713.943.0688 • (Fx) 713.944.9445 • www.amesfirewater.com
Installation Guidelines
• Prior to installation, flush line to remove debris.
• Install valve horizontally “in line” (cover facing UP), so flow arrow matches flow through the line. Avoid
installing valves 6” or higher vertically. Consult factory prior to ordering if installation is other than
described.
• Install inlet and outlet isolation valves. NOTE: When using butterfly valves, insure disc does not contact
control valve. Damage or improper valve seating may occur.
• Provide adequate clearance for valve servicing and maintenance,
• Install pressure gauges to monitor valve inlet and outlet pressure.
• Connect Solenoid to proper electrical source in compliance with local electrical codes.
Other AMES Pressure Relief / Backpressure or Sustaining Control Valves
920 / 620 Pressure Relief / Backpressure or Sustaining Valve
920-01 / 620-01 Pressure Sustaining Valve with Hydraulic Check Feature
920-15 / 620-15 Pressure Sustaining Valve with Solenoid (On-Off) Feature
925 / 625 Surge Anticipator and Pressure Relief Valve
PRESSURE SUSTAINING VALVE with
SOLENOID (On-Off) and HYDRAULIC
CHECK FEATURE
920-01-15
620-01-15