Canon Leather Soft Case 70 - Manual (Page 118)

116
Subject in recorded image is too dark.
Insufficient light for
shooting. zSet the flash to (flash on) (Basic
Guide p. 14).
The subject is
underexposed because
the surroundings are too
bright. zSet the exposure compensation to a
positive (+) setting (p. 52).
zUse AE lock or use the spot metering
function (pp. 49, 51).
Subject is too far away
for flash to reach. zShoot within correct flash range of
the subject when using the built-in
flash (p. 135).
zRaise the ISO speed and then shoot
(p. 65).
Subject in recorded image is too bright, or
image flashes white.
Subject is too close,
making the flash too
strong. zShoot within correct flash range of
the subject when using the built-in
flash (p. 135).
The subject is
overexposed because
the surroundings are too
dark. zSet the exposure compensation to a
negative (-) setting (p. 52).
zUse AE lock or use the spot metering
function (pp. 49, 51).
Too much light is shining
directly into the camera,
or is being reflected off
the subject. zChange the shooting angle.
Flash is set to on. zSet the flash to (flash off) (Basic
Guide p. 14).
Image contains noise.
ISO speed is too high. zHigher ISO speeds and the (High
ISO Auto) setting may increase image
noise. For higher image quality, select
as low an ISO speed as possible
(p. 65).
zIn , , , , , and
modes, the ISO speed increases and
noise can appear.