Canon CanoScan LiDe 50 - Manual (Page 8)

6
Connect the Scanner
1
Peel the caution seal from the back of the scanner.
2
Connect the scanner to the computer with the supplied USB interface cable.
• Confirm that the scanning unit is unlocked. (P.5)
Windows
Macintosh
• Only use the USB interface cable provided with the scanner. Use of other cables may
lead to a malfunction.
• The scanner does not have a power switch. The power is activated as soon as the
computer is turned on.
USB Interface Cable
Wide Flat Connector
Small Square Connector
USB Interface Cable
Wide Flat
Connector
Small Square Connector