Troubleshooting – Cuisinart CWC-1200DZ User Manual

Page 9

Advertising
background image

9

TROUBLESHOOTING

You can easily solve many common problems by trying the suggestions below.

SYMPTOM

POSSIBLE CAUSE

Vibration

• Check to make sure the wine cellar is on a level surface.

The inside temperature does not
seem correct

• Make sure the cooling vents on the right and left sides of the cooler are

not obstructed. Have at least 3 inches of space on left side and rear
of unit, with 5 inches on the right side.

• The room may be too hot. Example: if the ambient temperature is 80ºF

(27ºC) or higher, the unit can have diffi culty chilling adequately on the
white wine setting.

• When using the unit for the fi rst time, it can take the unit up to 48 hours

to reach the desired temperature.

Wine cellar does not operate

• Check if wine cellar is plugged in.

• Check if there is power at the AC outlet by checking the circuit breaker.

Wine appears too warm

• Frequent door openings.

• Allow time for recently added wine to reach desired temperature.

• Check gaskets for proper seal.

• Adjust temperature control to colder setting.

Wine temperature is too cold

• If temperature control setting is too cold, adjust to a warmer setting.

Wine cellar runs too frequently

• This may be normal to maintain constant temperature during high

temperature and humid days

• Doors may have been opened frequently or for an extended period

of time.

• Check gasket for proper seal.
• Check to see if doors are completely closed.

Moisture buildup on interior or
exterior of the wine cellar

• This is normal during high humidity periods.

• Prolonged or frequent door openings.

• Check door gaskets for proper seal.

Wine cellar door does not
shut properly

• Level the wine cellar.

• Check for blockages (wine bottles, shelves)

Advertising