Esselte LCP4210 - Manual (Page 12)

This Digital LCP TV includes the following 6 modes.
1. TV/DTV :ANALOG TV MODE;DIGITAL TV MODE
2. VIDEO 1/VIDEO 2:AUDIO/VIDEO INPUT MODE
3.S-VIDEO: S-VIDEO SIGNAL INPUT MODE
4.Component 1/Component 2 :Y Pb Pr /AUDIO(L/R)
INPUT MODE
5. PC:PC INPUT MODE
6.HDMI 1/HDMI 2/HDMI 3 :HDMI SIGNAL INPUT MODE
Press the SOURCE button to display the menu , use the
and button to select the required mode, press the
OK Button
Selected mode.
1. TV/DTV MODE
Press the MENU button to enter the main menu.
Press the and button to select the.
“VIDEO/AUDIO/CHANNEL/FUNCTION/LOCK ”control
functions, press the and button to adjust the needed item.
NOTE: the MENU and EXIT button can be used as the EXIT function when want to
leave the menu.
1.OSD of the VIDEO function
MENU INTRODUCTION
Press or button to reach the required setting.
1. Picture mode: STANDARD/VIVID/CUSTOM/MILD
2. Adjust the brightness of the display.
3. Adjust the contrast of the display.
4. Adjust the color of the display.
5.Adjust the tint of the display.
6.Adjust the sharpness the display.
7.Picture color temperature adjust,Press"OK"to enter the submenu. Press or
button to select the mode :Standard→ Warm→Custom→Cool.
8. Advanced Video.Press or button to select the DNR :Off→ Weak→Medium
→Strong→Auto.
OSD MENU
Select Source
TV
Video 1
Video 2
S-Video
Component 1
Component 2
PC
HDMI 1
HDMI 2
HDMI 3
9
Video
Audio
Channel
Function
Lock
Video Select Exit CH+/-
VOL+/- EXIT
Mode Stan dard
Brightne ss 33
Contrast 53
Color 60
Tint 0
Sharpn ess 40
Color Temperatu re
Advanced Video
OK Enter
Video
Audio
Channel
Function
Lock
DNR Weak
Black Level Exte nder off
White peak Limiter off
CTI off
Flesh Tone off
Adaptive Luma Control off
Select Back CH+/-
VOL+/- EXIT Advanced Video