Canon BJC-4400 - Manual (Page 30)

3-4 Paper Handling Chapter 3
Back Print Film
Canon Back Print Film BF-102 has been specially developed for Canon
Color Bubble Jet printers. The film is designed to deliver brilliant, high-
intensity color images suitable for business presentations, design work,
or professional reports. Back print film is printed on the back (non-
glossy) side of the film in mirror image and then viewed from the front
or glossy side using a backlighting device.
High Gloss Film
The Canon High Gloss Film HG-101 features a bright white finish that
lends striking visual power to charts, graphs, and photographic images.
Use this film to make your presentation materials and graphics look
professional.
N
If you are printing in an application outside Windows, your software
application or printer driver must support mirror image printing in
order to use Back Print Film or T-Shirt Transfers.
Paper Guidelines
When selecting or loading paper, please remember the following:
❍ Attempting to print on damp, curled, wrinkled, or torn paper can
cause paper jams and poor print quality.
❍ Use cut-sheet paper only. You cannot use multipart paper.
❍ When using graph paper, the lines may not match because the
1/6-inch line spacing of the printer is slightly less than that of
graph paper.
❍ If the print density of your page is very high, light paper stock may
curl slightly due to the large amount of ink. If you need to print
dense graphics, try printing on heavier stock.
❍ Do not use thicker paper than meets the specifications for this
printer. Printing with a paper that is thick enough to come in
contact with the print head nozzles may damage the BJ cartridge.
❍ When printing on legal size paper (or larger), do not extend the
paper output tray.