Chauvet SLIMPAR 56 - Manual (Page 4)

Page 4 of 17 SlimPAR™ 56 User Manual (Rev. 02)
Safety Notes
Please read the following notes carefully because they include important safety
information about the installation, usage, and maintenance of this product.
 Keep this User Manual for future consultation. If you sell this product to another user, be
sure that they also receive this document.
 Always make sure that the voltage of the outlet to which you are connecting this product is
within the range stated on the decal or rear panel of the fixture.
 This product is for indoor use only! To prevent risk of fire or shock, do not expose this fixture
to rain or moisture.
 Make sure there are no flammable materials close to the unit while operating.
 Always install this product in a location with adequate ventilation, at least 20 in (50 cm) from
adjacent surfaces.
 Be sure that no ventilation slots on the unit’s housing are blocked.
 Always disconnect this product from the power source before cleaning it or replacing fuse.
 Make sure to replace the fuse with another of the same type and rating.
 If mounting this product overhead, always secure it to a fastening device using a safety
cable.
 The maximum ambient temperature (Ta) is 104° F (40° C). Do not operate this product at
higher temperatures.
 In the event of a serious operating problem, stop using the unit immediately.
 Never try to repair this product. Repairs carried out by unskilled people can lead to damage
or malfunction. Please contact the nearest authorized technical assistance center.
 Never connect this product to a dimmer pack.
 Make sure the power cord is not crimped or damaged.
 Never disconnect the power cord by pulling or tugging on the cord.
 Never carry a fixture from the power cord or any moving part. Always use the
hanging/mounting bracket or the handles.
 Always avoid direct eye exposure to the light source when this fixture is on.