CatEye STRADA CC-RD200 - Manual (Page 21)

CATEYE STRADA CADENCE
Quick Start Manual
How to install the sensor
Fixing the sensor and magnet
(Installation is completed)
Route the cable
Adjust the clearance between
the sensor and magnet
Install the cadence magnet
Install the cadence sensor
Install the wheel magnet
Install the speed sensor
Route the cable
Fix the wire to the frame with nylon ties where ap-
plicable, and route it to the handle while winding
around the brake cable. Cut off any excess nylon tie
using a nipper.
Caution: Adjust this section so that the wire is
not stretched when you turn the handle.
Nylon ties
Adjust the positions of the
sensor and magnet
Return to Contents
Next Return