Slide number 45, Configuring manually (selecting access points) – Canon ImageCLASS MF4570dw User Manual

Page 45

Advertising
background image

45

Configuring Manually (Selecting Access Points)

<< Previous

Next >>

The screen below is displayed for approximately 2 seconds, and then the Wi-Fi indicator lights up.

* When one of the following messages appears, press [OK] to close the screen and check to make sure that the
type of encryption, the authentication method or encryption method, the network key are correctly entered. If
not, enter the network key again.
<Could not connect. Check security settings.>
<Open authentication failed. Check WEP settings.>
<Shared Key auth. Failed. Check WEP settings.>
<Set encryption to Auto.>
<Could not connect. Check PSK settings.>

Advertising