Motorola WR850GP - Manual (Page 52)

Configuration Section 3
WR850 3-15
Field Description
RADIUS Shared
Secret
RADIUS Shared
Secret
Confirmation
Type the RADIUS password in this field.
Re-type the RADIUS password in this field.
Wireless MAC
Access Control
List Enables you to control which device accesses your wireless network
based upon their MAC address. The default is disabled. The options
are:
Enable Select to enable/disable the MAC Access Control List
(ACL). When disabled, the MAC ACL is not active and any
wireless station is allowed to communicate with the
wireless router.
Allow Allows only the wireless devices in the Access Control List
(ACL) to communicate with the wireless router.
Deny Denies wireless devices in the ACL from communicating
with the wireless router.
To add a MAC address to the ACL:
1 Check Enable.
2 Select Allow or Deny from the drop-down list.
3 Enter a MAC address or use one of the Learned MAC
Addresses. To use one of the Learned MAC addresses, click the
address number. The number automatically appears in the
Wireless MAC Address Control List.
To alter a MAC address, remove and replace with the updated
address.
4 Click Add to enter the address into the ACL.
5 Click Apply to save.
To delete a MAC address from the ACL:
1 Click the MAC address you wish to delete. Once activated, the field
will change color.
2 Click Remove to clear the address.
3 Click Apply to save.
Learned MAC
Addresses Displays the MAC addresses (wireless devices only) the router has
already recorded.
If you wish to use one of the displayed MAC addresses, click the
address number. The number automatically appears in the Wireless
MAC Address Control List.
Click Refresh to force the router to search for additional MAC
addresses.