Bv-120hr, Red voodoo all tube guitar amplifier – Crate Amplifiers RED VOODOO BV-120HR User Manual

Page 8

Advertising
background image

Technical Specifications:

Output Power Rating

100 watts RMS @ 5% THD 8 or 16 ohm load, 120 VAC

Gain

Channel 1

66dB, tones at “10” @ 1kHz

Channel 2

96dB, tones @ “10” @ 1kHz

Tone Control Range

Channel 1

Low

16dB @ 100Hz

Mid

20dB @ 300Hz

High

10dB @ 10kHz

Channel 2

Low

16dB @ 100Hz

Mid

11dB @ 650Hz

High

16dB @ 10kHz

Presence

5dB @ 10kHz

Input Impedance

1M ohm

Maximum Signal Accepted

2.8V peak to peak

Tube Types

Preamp

12AX7A (3)

Power Amp

12AX7A (1), 6L6GT/5881 (4)

Line Out Level

1.2V RMS nominal

Power Requirements

120VAC, 60Hz, 180VA
100/115VAC, 50/60Hz, 180VA
230VAC, 50/60Hz, 180VA

Size and Weight

12”H x 30.25”W x 10”D, 50lbs.

Crate continually develops new products, as well as improves existing ones. For this reason, the specifications and information in this manual are subject to change without notice.

The BV-120HR is covered with high-quality, durable red Tolex

®

. To keep the cabinet looking its best, avoid

abrasive cleansers. Wipe the cabinet clean using a slightly dampened soft cloth. Do not spray cleaners directly

into the amplifier. Never use harsh cleaners on the hardware since they could damage their protective coatings.

P/N 47-631-05 • 06/99

BV-120HR

RED VOODOO All Tube Guitar Amplifier

©1999 SLM ELECTRONICS

A division of St. Louis Music

1400 Ferguson Avenue

St. Louis, Mo 63133

www.crateamps.com

Advertising