Cabletron Systems HSIM-G01 - Manual (Page 26)

Chapter 3:
3-2 HSIM-G01/G09 User’s Guide
Table 3-1 HSIM-G LEDs
NOTE
The terms flashing, blinking, and solid used in Table 3-1
indicate the following:
Flashing indicates an irregular LED pulse.
Blinking indicates a steady LED pulse. (approximately 50%
on, 50% off)
Solid indicates a steady LED light. No pulsing.
LED Color Definition
Transmit
Green (Flashing) Activity, port enabled.
Amber (Blinking) Port in standby.
Off No activity, port enabled.
Red (Flashing) Transmit fault.
Red Diagnostic failure.
Receive
Green (Solid)
Indicates port has successfully negotiated
with link partner. If Auto-Negotiate is
disabled, this indicates optical link.
Green (Blinking) Link, port disabled.
Amber (Flashing) Link, activity. Port enabled.
Off
No link, no activity. Port enabled or
disabled.
Red Diagnostic failure.
LNK
Green Indicates optical link.
Off No link.