Canon Projectors - Manual (Page 7)

7
Service port
Video input
S-Video terminal
Stereo audio input
Analog RGB input/
Component input
Monitor output
Digital RGB input/
Analog RGB input (DVI-I)
The SX6, SX60, and X600 models feature DVI-I
and analog component HD input interfaces. In
addition to SD signals from DVD players, these
projectors can display high-definition digital
video signals as large as 1080i.
• HDCP Compliant DVI-I terminal, Motion Adaptive
IP conversion, and Film Mode (2-3 Pull down)
Compatible with a variety of image input signals, including HDTV.
Feature-Rich Technology Engineered For Excellence.
The SX6, SX60, and X600 models are equipped with an internal charging system to
run the fan. This makes it possible to unplug the projector right after using it, while
the internal charging system keeps the fan running.
Off and Go
Internal charging system
for cooling fan.
When presentation
is finished, the unit can be
unplugged immediately.
The SX6, SX60 and X600 can be switched on and off from a central control
terminal without actually pressing the buttons on the main unit, permitting
remote operation when the projector is mounted overhead. It is also possible
to control the power supply by simply connecting or disconnecting the
power cable.
Direct Power ON
When Direct Power setting is 'On', the
projector starts up automatically when power
is supplied and is ready to display images
in approx. 20 seconds.
THE F
E
A
TURES
▼ ▼
USB port