Englis h 11 – Clarion CX201 User Manual

Page 11

Advertising
background image

Basic Operations

E

nglis

h

11

CX201

3-1. Each time you turn the [ROTARY] knob to

select the setting, the setting changes in
the following order:

“THROUGH”

↔ “60” ↔ “90” ↔ “120”

∗ The factory default setting is

“THROUGH

”.

● Adjusting the subwoofer output

volume

You can adjust the volume output from the unit’s
subwoofer output terminal.

This adjustment can be performed only when
the “REAR/S-W” is set to “S-WOOFER”.

2-1. Select “S-W VOL”.
3-1. Turn the [ROTARY] knob to increase or

decrease the subwoofer volume.

∗ The factory default setting is

“0

”.

(Adjustment range: +6 to –6)

● Setting the phase

This set can be performed only when the
“REAR/S-W” is set to “S-WOOFER”.

2-1. Select “PHASE”.
3-1. Turn the [ROTARY] knob to select as

following order:
“NORMAL”

↔ “REVERSE”

∗ The factory default setting is “

NORMAL

”.

● Adjusting the high pass filter

2-1. Select “HPF”.
3-1. Each time you turn the [ROTARY] knob to

select the setting, the setting changes in
the following order:
“THROUGH” ↔

“60”

↔

“90”

↔

“120”

∗ The factory default setting is “THROUGH”

(through).

Note:
• During SOUND adjustment mode, if no operation

is performed for more than 10 seconds, this
mode can be cancelled and return to previous
mode.

CX201_EN.book Page 11 Wednesday, November 17, 2010 10:50 AM

Advertising