Cypress CapSense CY8C20396 User Manual

Capsense™ applications, Features

Advertising
background image

CapSense™ Applications

CY8C20x36/46/66, CY8C20396

Cypress Semiconductor Corporation

•

198 Champion Court

•

San Jose

,

CA 95134-1709

•

408-943-2600

Document Number: 001-12696 Rev. *D

Revised March 17, 2009

Features

■

1.71V to 5.5V Operating Range

■

Low Power CapSense™ Block

❐

Configurable Capacitive Sensing Elements

❐

Supports Combination of CapSense Buttons, Sliders,
Touchpads, Touch Screens, and Proximity Sensor

■

Powerful Harvard Architecture Processor

❐

M8C Processor Speeds Running to 24 MHz

❐

Low Power at High Speed

❐

Interrupt Controller

❐

Temperature Range: -40°C to +85°C

■

Flexible On-Chip Memory

❐

Three Program/Data Storage Size Options:
• CY8C20x36: 8K Flash / 1K SRAM
• CY8C20x46: 16K Flash / 2K SRAM
• CY8C20x66: 32K Flash / 2K SRAM

❐

50,000 Flash Erase/Write Cycles

❐

Partial Flash Updates

❐

Flexible Protection Modes

❐

In-System Serial Programming (ISSP)

■

Full-Speed USB

❐

Available on CY8C20396 and CY8C20666 Only

❐

12 Mbps USB 2.0 Compliant

❐

Eight Unidirectional Endpoints

❐

One Bidirectional Control Endpoint

❐

Dedicated 512 Byte Buffer

❐

Internally Regulated at 3.3V

■

Precision, Programmable Clocking

❐

Internal Main Oscillator: 6/12/24 MHz ± 5%

❐

Internal Low Speed Oscillator at 32 kHz for Watchdog and
Sleep Timers

❐

Precision 32 kHz Oscillator for Optional External Crystal
(CY8C20x46/66 only)

❐

0.25% Accuracy for USB with No External Components
(CY8C20396 and CY8C20666 only)

■

Programmable Pin Configurations

❐

Up to 36 GPIO (Depending on Package)

❐

Dual Mode GPIO: All GPIO Support Digital IO and Analog
Input

❐

25 mA Sink Current on All GPIO

❐

Pull up, High Z, Open Drain Modes on All GPIO

❐

CMOS Drive Mode(5 mA Source Current) on Ports 0 and 1:
• 20 mA (at 3.0V) Total Source Current on Port 0
• 20 mA (at 3.0V) Total Source Current on Port 1

❐

Selectable, Regulated Digital IO on Port 1

❐

Configurable Input Threshold on Port 1

❐

Hot Swap Capability on all Port 1 GPIO

■

Versatile Analog Mux

❐

Common Internal Analog Bus

❐

Simultaneous Connection of IO

❐

High PSRR Comparator

❐

Low Dropout Voltage Regulator for All Analog Resources

■

Additional System Resources

❐

I

2

C™ Slave:

• Selectable to 50 kHz, 100 kHz, or 400 kHz
• No Clock Stretching Required (under most conditions)
• Implementation During Sleep Modes with Less Than

100 µA

• Hardware Address Validation

❐

SPI™ Master and Slave: Configurable 46.9 kHz - 12 MHz

❐

Three 16-Bit Timers

❐

Watchdog and Sleep Timers

❐

Internal Voltage Reference

❐

Integrated Supervisory Circuit

■

Complete Development Tools

❐

Free Development Tool (PSoC Designer™)

❐

Full Featured, In-Circuit Emulator and Programmer

❐

Full Speed Emulation

❐

Complex Breakpoint Structure

❐

128K Trace Memory

■

Package Options

❐

CY8C20x36:
• 16-Pin 3 x 3 x 0.6 mm QFN
• 24-Pin 4 x 4 x 0.6 mm QFN
• 32-Pin 5 x 5 x 0.6 mm QFN

❐

CY8C20x46:
• 16-Pin 3 x 3 x 0.6 mm QFN
• 24-Pin 4 x 4 x 0.6 mm QFN
• 32-Pin 5 x 5 x 0.6 mm QFN

❐

CY8C20396: 24-Pin 4 x 4 x 0.6 mm QFN

❐

CY8C20x66:
• 32-Pin 5 x 5 x 0.6 mm QFN
• 48-Pin 7 x 7 x 1.0 mm QFN (with USB)
• 48-Pin SSOP

[+] Feedback

Advertising
This manual is related to the following products:
Table of contents