Harbor Freight Tools Chicago 91938 - Manual (Page 9)

Page 9 For technical questions, please call 1-800-444-3353. SKU 91938
SAFETY
OPERA
TION
MAINTENANCE
SETUP
Depth Adjustment
Note: The Cutting Depth will need to be adjusted
whenever a worn down wheel is replaced with a new one.
1. Loosen the Nut (15) on the Depth Adjustment
Bolt (16) shown in Figure D.
Figure D: Depth Adjustment
Depth
Adjustment
Bolt (16)
Nut (15)
2. Turn the Depth Adjustment Bolt (16) to change
the depth so that the wheel will not contact
the base at any time during cutting.
3. After adjustment, tighten the Nut (15) against the
Bracket (14) to lock the adjustment in place.