Corinex Global ETS 300-826 - Manual (Page 33)

30
Configuration
Corinex Wireless G USB Mini Adapter
Mode Description
Disabled The MAC Address filter is disabled - all clients can access your net-
work.
Accept Only wireless clients at the specified MAC Addresses can access your
network. No other wireless clients can connect to your access point
Reject Wireless clients at the specified MAC addresses are blocked from ac-
cessing your network. Any and all other wireless clients can connect.
If you select the Accept or Reject mode, enter the MAC addresses you wish to
allow or block. Each MAC address has to be entered as a 12 hexadecimal number
without any delimiters (no commas, colons, spaces, etc.).
After setting up the MAC Address Filter, please click on Apply and close the
window.
3.2.8 Bridge Adapter
In access point mode, you may want to provide additional connection possibilities
for the wireless clients. Because the Corinex Wireless G USB Mini Adapter doesn’t
have an Ethernet port, and is connected directly to your PC, you may want to set up
bridging between the wireless connection and some other network card.
For example, if your computer has an Ethernet connection providing Internet to
your PC, you can bridge the wireless connection with your Ethernet card, so that
wireless clients will get access to your Internet connection. In order to do this, se-
lect your Ethernet card from the list of network adapters, as shown in the example
below.
The wireless clients will get full access to your Internet connection, they can use the
services provided by DHCP servers in the wired network, and will gain access to
shared resources and devices, such as network printers.