Canon 3410 - Manual (Page 22)

21
IMPORTANT
The following shows the paper capacity of the paper cassette. Be sure that the
paper stack does not exceed the load limit marks. If the paper stack exceeds the
load limit marks, this may result in misfeeds.
5
Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
CAUTION
When setting the paper cassette in the printer, be careful not to catch your
fingers.
When Loading Custom Size Paper
Load custom size paper in the paper cassette using the following procedure.
IMPORTANT
• You can load paper of the following custom paper sizes.
- When loading paper in portrait orientation: Width 148.0 to 215.9 mm; Length 210.0 to
355.6 mm
- When loading paper in landscape orientation (only when LIPS LX Printer Driver is
used): Width 210.0 to 215.9 mm; Length 210.0 to 215.9 mm
• For more details on the usable paper, see "Usable Paper," on p. 7.
• Do not load paper other than plain paper (64 - 80 g/m 2 ) and heavy paper (90 - 120 g/m 2 ).
This may result in paper jams or damage to the printer.
• When custom size paper is loaded, specify the setting for <
> as follows.
- When the paper is loaded in landscape orientation (only when LIPS LX Printer Driver is
used): < >
Paper Type Cassette 1 Cassette 2
Plain paper (Ex. 64 g/m 2 ) Approx. 250 sheets Approx. 500 sheets
Heavy paper (Ex. 90 g/m 2 ) Approx. 200 sheets Approx. 400 sheets
Cassette 1 Cassette 2