Contec SPI-8451-LVA - Manual (Page 15)

2. System Reference
8
SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
Table 2.1. Functional Specifications [SPI-8451-LLVA, SPI-8452-LLVA] < 2 / 2 >
Specifications
Type
SPI-8451-LLVA SPI-8452-LLVA
The RTC (real-time clock) and CMOS data backup by the lithium battery.
The Lithium battery specification is shown in table
Specification BR-2/3AC2P
Voltage 3V
Capacity 1200mAh
Weigh 15.5g
RTC/CMOS
* Backup time: Over 10 years at none AC power 25ºC.
* Real Time Clock accurate:
±3 minutes/month at 25ºC.
Power Management
Power management setup via BIOS
Modem Ring On/Wake One LAN
Supports PC98/PC99 ACPI Power management
Bus specification/Size (mm) PCI/ISA (PICMG) *2 / 338 (L) x 122 (H) x 28(W) *3
DC Power Requirements
+5VDC ±5%
+12VDC ±5%
+5VSB (Stand by) ±5% (only when using the ATX power supply)
Power supply specifications
(Max.)
Intel Pentium 4 Processor 2.8 GHz :
+5VDC, 5.4A
+12VDC, 7.0A
+5VSB, 0.5A
Operating temperature /
Operating Humidity 0 - 60 o C (It depends on the specification of CPU and heat sink.) /
10 - 90%RH (No condensation)
Storage temperature -20 - 80 o C
Floating dust particles Not to be excessive
Corrosive gases None
Weight 517g
Operating System Support
Windows XP Professional
Windows XP Home Edition
Windows 2000 Professional
*1 : The RAID is not supported Hot Swap. The PC-SDD series is not able to use for the RAID drives.
*2 : ISA master and ISA memory refresh are not supported.
*3 : This board requires the width for 2slots (except CPU heatsink-fan hight).