Chicago Electric 66891 - Manual (Page 9)

SKU 66891 For technical questions, please call 1-800-444-3353. Page 9
Symbology
n0 xxxx/min.
No Load Revolutions per Minute
(RPM)
SpeCiFiCationS
Electrical Requirements 120V, 60 Hz
3.12 AMPS (No Load)
Motor No Load Speed 3600 RPM
Power Plug 2-Prong, Grounded
Belt Replacement Size 2-1/2” X 14”
Dust Collection Opening 1” Diameter
unpaCking
When unpacking, make sure that the
item is intact and undamaged. If any parts
are missing or broken, please call Harbor
Freight Tools at 1-800-444-3353 as soon
as possible.
aSSemBlY
No assembly is required for this Compact
Belt Sander.
inStruCtionS For
putting into uSe
read the entire important
SaFetY inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
to preVent
SeriouS injurY
From aCCidental
operation:
turn the power Switch of the
Compact Belt Sander to its
“oFF” position and unplug
the tool from its electrical
outlet before inspecting, or
making any adjustments.
note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
operating inStruCtionS
read the entire important
SaFetY inFormation
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this Compact Belt
Sander.
tool Set up
to preVent
SeriouS injurY
From aCCidental
operation:
turn the power Switch of this
Compact Belt Sander to its
“oFF” position and unplug
the tool from its electrical
outlet before performing any
inspection, maintenance, or
cleaning procedures.
Changing the Sanding Belt: 1.
Be sure the Compact Belt Sander a.
is turned “OFF”, and that it is un-
plugged from the power outlet.