Cub Cadet CC4105 User Manual

Page 3

Advertising
background image

3

RULES FOR SAFE OPERATION

SAFETY AND INTERNATIONAL SYMBOLS

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the
operator's manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

MEANING

• ON/OFF STOP CONTROL

ON / START / RUN

• WARNING - READ OPERATOR'S MANUAL

Read the operator’s manual(s) and follow all
warnings and safety instructions. Failure to do
so can result in serious injury to the operator
and/or bystanders.

• ON/OFF STOP CONTROL

OFF or STOP

SYMBOL

MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning or caution. May be
used in conjunction with other symbols or
pictographs.

• WEAR EYE AND HEARING PROTECTION

WARNING: Thrown objects and loud noise
can cause severe eye injury and hearing loss.
Wear eye protection meeting ANSI Z87.1
standards and ear protection when operating
this unit. Use a full face shield when needed.

• KEEP BYSTANDERS AWAY

WARNING: Keep all bystanders, especially
children and pets, at least 50 feet (15 m) from
the operating area.

• THROWN OBJECTS AND ROTATING

CUTTER CAN CAUSE SEVERE INJURY

WARNING: Do not operate without the
cutting attachment shield in place. Keep
away from the rotating cutting attachment.

• HOT SURFACE WARNING

Do not touch a hot muffler, gear housing or
cylinder. You may get burned. These parts get
extremely hot from operation. They remain hot
for a short time after the unit is turned off.

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

• OIL

Refer to operator’s manual for the proper
type of oil.

• SHARP BLADE

WARNING: Sharp blade on cutting
attachment shield. To prevent serious injury,
do not touch the line cutting blade.

• PRIMER BULB

Push primer bulb, fully and slowly, 10 times.

KNOW YOUR UNIT

Primer

Bulb

Oil Fill Plug/

Dipstick

Spark Plug

Air Filter Cover

Cutting

Attachment

Shield

Fuel

Cap

Throttle

Control

J-Handle

Cutting Attachment

Shaft Grip

On/Off Stop Control

Shaft

Housing

Starter Rope Grip

Line

Cutting

Blade

Muffler

Spark Arrestor

Muffler Guard

APPLICATIONS

As a trimmer:

• Cutting grass and light weeds

• Edging

• Decorative trimming around trees, fences, etc.

NOTE: The below illustration may differ slightly from your
unit. For example, the picture shows a straight shaft.
Your unit may have a curved shaft.

Advertising