Casio QV-120 - Manual (Page 16)

61
Sympton Probable Cause Action
1. Set function switch to
PLAY (page 31).
2. Connect correctly us-
ing the special video
cable that comes with
the camera (page 32).
3. Set up the TV cor-
rectly.
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 45).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 45).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 45).
Unhide protected memo-
ry pages by holding down
[–] while turning power on
(page 45).
Troubleshooting
1. Function switch set to
REC
2. Incorrect camera-TV
connection
3. Wrong TV set up
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Protected memory pages
are hidden.
Camera is con-
nected to a TV,
but LCD monitor
contents do not
appear on TV
screen.
S o m e i m a g e s
are missing.
C a n n o t u s e
multi-page dis-
play.
Cannot protect
memory pages.
A L L D A T A I S
P R O T E C T E D !
stays on monitor
and images do
not appear.
Playback
62
Reference
Sympton Probable Cause Action
1. Unprotect the page
you want to delete
(page 43).
2. Change to a normal-
size, 1-page display
format.
Remove batteries and
disconnect the AC adap-
tor if you are using one.
Restore power and turn
the camera on. If this
does not work, contact
your dealer or an author-
ized CASIO service pro-
vider.
Adjust the BRIGHT set-
ting (page 11).
Remove batteries and/or
unplug the AC adaptor.
Reload batteries and/or
plug in AC adaptor and try
operation again.
A d j u s t t h e B R I G H T
(brightness) setting.
1. C o n n e c t c o r r e c t l y
(page 51).
2. Turn power on after
connecting cable.
3. Set function switch to
PLAY (page 31).
1. A l l p a g e s a r e p r o -
tected.
2. M u l t i - p a g e d i s p l a y
(page 34) or zoom dis-
play (page 36)
Malfunction due to static
electrical charge or strong
impact
Wrong BRIGHT setting
Malfunction due to expos-
ing camera to electro-
static charge.
Incorrect BRIGHT setting
1. Incorrect cable con-
nection
2. Camera connected to
is not turned on.
3. Function switch sets to
REC.
Delete opera-
tion does not
start when DEL
is pressed.
All buttons and
switches do not
operate.
Very bright or
very dark LCD
image.
No buttons or
switches oper-
ate.
LCD monitor is
too bright or too
dark.
C a n n o t e x -
change data be-
tween two cam-
eras
Other
Deletion
63
Sympton Probable Cause Action
Pressing MODE
does not change
t h e F I N E
NORMAL Menu.
Cannot transfer
d a t a ( e r r o r
keeps occurring)
K e y s o f c o n -
nected camera
are disabled.
1. Correct the situation
and try again.
2. Correct the situation
and try again.
3. C h a n g e f u n c t i o n
switch setting of re-
c e i v i n g c a m e r a t o
PLAY (page 31).
4. The sending camera’s
p r o t e c t e d m e m o r y
pages are hidden. Un-
hide protected memory
pages by holding down
[–] while turning power
on (page 45).
5. Replace batteries or
use the AC adaptor
(page 13).
6. Securely reconnect the
cable.
Normal operation will re-
turn when you exit data
communications by press-
ing EXIT.
There are no convertible
images in memory.
1. S e n d i n g c a m e r a ’ s
memory is empty.
2. Receiving camera’s
memory is full
3. Receiving camera’s
function switch is in
REC position.
4. The message “ALL
DATA IS PROTECT-
ED” is on the monitor
of the sending camera.
5. Low battery (indicated
by )
6. Disconnection of cable
during data communi-
cation
Connected camera op-
eration is disabled during
data communications.
Troubleshooting
Other
64
Reference
Messages
Camera is set up to hide protected images, and all
images are protected.
ERROR Error during data communication. Check cable con-
nections and mode settings.
REMAIN No more memory for FINE images. Use MODE to
change to NORMAL Mode, delete some images, or
change resolution of existing images from FINE to
NORMAL.
MEMORY FULL Not enough memory for further recording. Delete
some images from memory or change resolution of
stored images from FINE to NORMAL.
MEMORY EMPTY No images are stored in memory.
Problem with internal memory. Contact your dealer or
an authorized CASIO service provider.
ALL DATA IS
PROTECTED
MEMORY ERROR
#1~#4
CONSULT THE
OWNER’S MANUAL!