CyberHome Entertainment CH-DVD 452 - Manual (Page 24)

Start playing
1. Press the Play button “A” to start playing the disc.
2. If the disc inserted is a DVD disc, the title menu can be selected for playing
or various special playing functions can be selected depending on the con-
tent of the disc.
3. If the disc inserted is a VCD disc with PBC function, the menu will appear
on the screen and the operation can be done according to the instructions
in the menu or the “MENU” button can be pressed again to remove the
PBC function and to play directly.
4. If the VCD disc does not have PBC function or if the disc inserted is an ordi-
nary music CD, the entire disc will be played directly.
Pausing a disc
1. With DVDs and Video CDs, you can pause the playback on a still frame by
pressing the Pause button “II”.
2. Pressing the Pause button while playing Audio CDs, this will mute the sound
and hold the play position.
3. Press this button again to resume normal playback.
Stop playing
1. Press the Stop button “ J ” to stop the playback of the disc.
2. After the Stop button has been pressed, the CyberHome splash screen will
be displayed on the screen with Audio CDs, DVDs and Video CDs. The stop
point is now saved and you can resume playback by pressing the Play but-
ton “
A ”.
3. Pressing the Stop key “ J ” twice will reset the play position to the beginning
of the disc.
Removing a disc
Press the Open/Close button “
K
” on the front panel or on the remote control
to open the tray.The screen display indicates “OPEN” the tray opens and you
can remove the disc.
Switching off the power
After pressing the button “ON/STANDBY” on the front panel or the button
“POWER” on your remote control, the device will go into standby mode. In
order to switch the device completely off, please remove the power cord from
the wall socket.
GETTING STARTED
25
ENG