Cobra Electronics CP-2525 User Manual
Page 9
16
15
8.
Press STORE. The display will show LOCATION?
9.
Enter the location number. It can be the current location or a new one. The
display will show REPLACE?
10. Press STORE. The display will show REPLACED.
11. The phone will automatically revert to Standby mode in a few seconds.
To delete a directory memory:
1.
Press the MEMORY button. The display will show LOCATION?
2.
Either enter the location number (01 to 30) or use the SCROLL up and
DOWN buttons to Þnd the entry you want to change. The display will show
the memory entry.
3.
Press the DELETE button. The display will show DELETE?
4.
Press the DELETE button again. The display will show DELETED.
5.
The phone will automatically revert to Standby mode in a few seconds.
To delete all directory memories:
1.
Press the MEMORY button. The display will show LOCATION?
2.
Either enter the location number (01 to 30) or use the SCROLL up and
DOWN buttons to Þnd the entry you want to change. The display will show
the memory entry.
3.
Press the DELETE button for moe than two seconds. The display will show
DEL ALL?
4.
Press the DELETE button again. The display will show DELETED.
5.
The phone will automatically revert to Standby mode in a few seconds.
To automatically dial a name and number from the electronic directory:
1.
Lift the handset from the base.
2.
Press the Memory button. The display will show LOCATION?
3.
Enter the location number (01 to 30) or press the SCROLL up and down
buttons. The display will show the directory entries. Stop when you reach
the desired entry.
4.
Press the TALK button. The display will show TALK and the number dialed.
5.
Press OFF when the conversation is over or place the handset back into the
base.
ELECTRONIC DIRECTORY (CONT‘D)
Each time you dial, the phone number youÕre calling is automatically saved in a
special REDIAL memory. To call that number again at a busy signal, press FLASH
(without hanging up) to get a new dial tone, then press and release the REDIAL
button. If you wish to try the call in a few minutes, use TALK to access the dial
tone, then press and release the REDIAL button. The number will automatically
be redialed.
LAST NUMBER REDIAL
FLASH
This feature brießy interrupts the phone line so that you may access some of the
advanced featuresÑlike ÓCall WaitingÓ and ÒThree-way CallingÓÑthat may be
offered at extra cost by your local telephone company. Press and release the
FLASH button on the handset to answer a second phone call or place a conference
call if you subscribe to these services. This function is available on the handset
and base
HEARING AID COMPATIBILITY
Your cordless telephone handset is compatible with inductively coupled hearing
aids (HAC).
SYSTEM
The revolutionary, patented Intenna hidden-antenna system is a Cobra exclusive.
Intenna is the worldÕs Þrst and only full-range-power cordless telephone that
conceals the handset and base antennas inside the phone and out of the way. No
more antennas to extend, bend or break. CobraÕs hidden antennas are perfectly
matched to your phoneÕs microprocessor circuitry for optimum performance
offering the ultimate in user-friendly convenience.
FIND
Find the handset by pressing the Find button on the base. The handset will emit
a beeping sound for thirty seconds.