CREATIVE Modem Blaster DE5773 - Manual (Page 37)

Troubleshooting B-3
Resolving Conflicts in
Windows 98SE/ME To run Device Manager:
1. Click Start -> Settings -> Control Panel.
2. Click the System icon. The System Properties dialog box appears.
3. Click the Device Manager tab.
4. Double-click Modem.
5. Select your modem and click the Properties button. The Properties dialog box of the modem
appears.
6. Click the Resources tab.
7. Click the Use Automatic Settings check box to select it. If this check box is already selected, you
need to go to the Properties dialog box of the conflicting peripheral device and select the same check
box there.
8. Restart your system to allow Windows 98/98SE to reassign resources to your modem and/or the
conflicting peripheral device.
Resolving Conflicts
in Windows 2000/
XP To run Device Manager:
1. Click Start -> Settings -> Control Panel.
2. Click the System icon. The System Properties dialog box appears.
3. Click the Hardware tab.
4. Click the Device Manager button.
5. Double-click Modem.
6. Click the name of your modem.
7. Right-click the name of your modem.
A menu appears.
8. Select the Properties option.
9. Click the Resources tab.
If you are unsure of which
peripheral device is causing the
conflict, you can isolate the source
of the problem by temporarily
removing all devices (except your
modem and essential devices such
as the disk controller). After that,
add the devices back one at a time
until the device that is causing the
conflict is found.