Combi 8100 - Manual (Page 28)

53
G. LATCH - Changing Belt Path Location:
• LATCH lower anchor belt MUST be routed
through the correct belt path for use.
• Identify correct belt path for rear-facing
or forward-facing based on age or
weight of child.
• To change lower anchor belt location,
- Remove seat pad.
- From inside seat, pull lower anchor
belt and connectors into the seating
area.
- Insert connector into correct
belt path openings and pull out.
• Check that belt adjuster slide button is
facing away from and seat and that
lower anchor belt is not twisted.
• Replace seat pad.
(fig. a)
(fig. b)
Rear-Facing
Belt Path
Forward-Facing
Belt Path
Belt Adjuster
Slide Button
54
Design and operation of vehicle seat belt systems vary from vehicle to
vehicle and from seating location to seating location in the same
vehicle. Not all vehicle seat belts can be used with a child restraint.
Refer to the information in this section for information on the various
types of vehicle seat belt systems.
To provide a secure installation of the car seat:
• Read the vehicle owner’s manual regarding securing a car seat
and vehicle seat belt use with car seat.
• Follow all instruction labels on vehicle seat belt and car seat.
If car seat does not stay tightly secured after following instructions in
this manual, vehicle seat belt labels, and vehicle owner’s manual:
• Move car seat to another seating location and try again, or
• Contact vehicle dealer for assistance and possible seat belt
modification parts.
• Obtain assistance, see “Need Help Installing Your Car Seat” in
“Proper Use Checklist” section.
Section 12 - Vehicle Seat Belts
WARNING
DEATH or SERIOUS INJURY can occur
• Not all vehicle seat belts can be used with a car seat. The car
seat must be held tightly at all times by a lap belt (or lap belt
portion of a lap/shoulder belt) that will not loosen while driving.