Calibre UK 12ID - Manual (Page 2)

Technical Information
Panel Specification:
Viewable image size 31cm/12.1" nominal.
Panel resolution 800x600.
Colour depth - 6 bits per colour, 18-bits total,
Viewing angles -
Toshiba panel deg TBA L/R, U/D,
NEC panel deg 55L/R, 40U/60D.
Panel brightness -
Toshiba panel 500cd/m
2
nominal,
NEC panel 350cd/m 2 nominal.
Panel contrast ratio -
Toshiba panel 250:1 typical,
NEC panel 350:1 typical.
Signal compatibility:
Input 1 –
computer RGB via 15HDD socket.
640x350 up to 1024x768, 50-70Hz refresh, non-
interlaced. (Note: 1024x768 support is via image
downscaling to fit the 800x600 resolution panel.
There may be a slight loss of image quality in
downscale mode.)
Syncs: separate TTL/5V positive or negative,
negative combined sync TTL level, or negative sync
on green consisting of 0.3V sync and 0.7V video.
Input 2 –
composite video via BNC
PAL, NTSC or SECAM, automatic standards
detection. Pro Video model has automatic enhanced-
bandwidth monochrome mode.
Input 3 – YC/S-Video via 4-pin Mini-DIN
PAL, NTSC or SECAM, automatic standards
detection.
Input 4 –
Pro Video Option Only
RGB or YUV component video via 3 or 4 BNCs.
Input 5 – Pro Video with SDI Option Only
SDI Serial Digital Video via BNC.
Input 6 – DVI Option Only
DVI Digital Visual Interface, DDC2B compatible for
connection to DVI compatible graphics cards.
Touchscreen option:
Resistive touchscreen with RS232 serial controller
available to special order.
Power requirement:
12VDC at approximately 35W with NEC panel, 40W
with Toshiba panel.
An optional mains PSU is available.
Other power options available to order include
ground isolated 12VDC, 24VDC and, 28VDC with
optional industrial or military grade power filtering.
These options may be subject to MOQs.
Model numbers:
31SLCD16 xx y zz
| | |
| | |-SC = open chassis
| |
| |-N = NEC panel
| |-T = Toshiba panel
|
|-01 = VGA analogue only
|-02 = VGA analogue + DVI
|-03 = VGA analogue & Std Video
|-04 = 03 + DVI
|-05 = VGA analogue & Pro Video
|-06 = 05 + DVI
|-09 = 05 + SDI Video
|-10 = 05 + DVI + SDI Video
|-11 = Standard video only
|-13 = Professional video only
|-14 = Pro Video + SDI
Dimensions and Weights:
Open chassis models
Size TBA mm
Unit weight approx 1.5Kg, Shipping weight TBA
Calibre UK Ltd
Cornwall House,
Cornwall Terrace,
Bradford, West Yorkshire
BD8 7JS, England
Tel +44 (0)1274 394125
Fax +44 (0)1274 730960
E-mail [email protected]
Web-site www.calibreuk.com
Issue 1.21 E&OE specifications subject to change without notice 10/12/07 All trademarks acknowledged.