Casio EX-Z300 - Manual (Page 119)

119
Using the Camera with a Computer
Install the required software in accordance with what version of the Macintosh OS
you are running and what you want to do.
IMPORTANT!
• The camera does not support operation with Mac OS 8.6 or earlier, or Mac OS X
10.0. Operation is supported with Mac OS 9, X (10.1, 10.2, 10.3, 10.4, 10.5) only.
Use the standard USB driver that comes with your supported operating system.
.
To connect the camera to your computer and save files
1.
Turn on the camera and press [MENU].
2.
On the “Set Up” tab, select “USB” and then press [6].
3.
Use [8] and [2] to select “Mass Storage”, and then press [SET].
Using the Camera with a Macintosh
When you want to
do this:
Operating
System
Version
Install this software:
See
page:
Save images to your
Macintosh and view
them there manually Mac OS 9
Installation not required. 119
Mac OS X
Save images to your
Macintosh
automatically/Manage
images Mac OS 9 Use commercially available software.
122
Mac OS X
Use iPhoto, which comes bundled
with your operating system.
Play movies
Mac OS 9 Playback not supported. 122
Mac OS X
Movie file playback is supported under
OS X v10.3.9 or higher when
QuickTime 7 or higher is installed.
122
Connecting the Camera to Your Computer and Saving Files